K°Protect Screen
PROTECT YOUR
HEAT EXCHANGER
DECREASE OF YOUR
HEAT EXCHANGER OPEX
The K°Protect Screen filters the inlet air of your Dry-Coolers, Condensers, Radiators and Air Handling Units by stopping airborne
debris like leaves, insects, cottonwoods, paper, plastics, hairs, etc. going into your heat exchanger.
By stopping this airborne debris before it enters the inner coil, fouling and clogging is prevented. Compared to coil cleaning the screen can be easily cleaned from the outside which results in a significant reduction of maintenance and coil cleaning costs.
As the coil is protected against fouling and clogging, the heat transfer is being kept on an optimal level which results in better system efficiency and lower energy costs.
YOUR BENEFITS
AT A GLANCE
STOPPING AIRBORNE DEBRIS ENTERING YOUR HEAT EXCHANGER
PROTECTING THE COIL FROM FOULING &
CLOGGING
REDUCING COIL CLEANING EFFORTS
UP TO 50%
LOWERING THE ENERGY CONSUMPTION
INCREASE OF THE EQUIPMENTS´ LIFETIME
►
►
►
►
►
K°PROTECT SCREEN
APPROACH
We are the experts in heat exchangers and thermodynamics.
We provide a custom fit solution with no down-time requirements during installation.
We can provide this service direct or through your trusted installer, across all brands.
THE SCREEN
Easy to clean when mounted by hand / brush / broom
Easy disassembly when damaged or for remote cleaning
Customized to suits every situation
Low air flow resistance of 20pa@3m/s
UV resistant
Standard mounting/fastening system is all PVC. If this system won’t fit at the unit, we can switch to Stainless steel custom solution.
Woven Polyester with a PVC coating
►
►
►
►
►
►
►
PROPERTIES
SPECIFICATION
4 STEP PROCESS
INSPECTION
We will perform a product
inspection to gather all
required information &
measurements.
PROPOSAL
We will define the
technical execution of
the product and provide a proposal.
INSTALLATION
We will install the Air
Inlet Screen on site
without any downtime
of your installation.
EVALUATION
After installation we
will evaluate the results.
REDUCTION OF CLEANING TIME BY 50 %
By using the new K°Protect Screen a reduction of cleaning time by 50 % over time is possible.
Due to the low initial investment costs as well as the easy mounting of the screen itself, your heat exchanger OPEX will decrease significantly.
Additional savings in regards to energy and maintenance are further benefits.
© 2023 Kelvion Holding GmbH - All rights reserved